Dell PowerEdge VRTX - Manual (Page 126)

Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
CMC8547
Message Missing kernel module arg1 . Failover condition detected
Arguments
• arg1 = module name
Detailed
Description A firmware error occurred causing the failover. If this condition continues, a failover will result.
If multiple failovers occur, contact Service.
Recommended
Response Action No response action is required. If the issue persists, contact your service provider.
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
CMC8548
Message Unable to communicate with peer CMC.
Detailed
Description The local CMC has lost network connection with peer CMC for more than the timeout duration.
The timeout duration is 25 seconds for primary CMC and five seconds for secondary CMC.
After detecting the error, failover is performed if secondary CMC is available, otherwise CMC is
reset.
Recommended
Response Action Make sure that the network cable is connected to the primary CMC. A Link loss was detected.
126