Dell PowerEdge VRTX - Manual (Page 755)

Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8537
Message Unable to add key for slot arg1 of service account, due to the key being too long.
Arguments
• arg1 = slot number
Detailed
Description The add key operation did not complete successfully for the slot identified in the message due
to the key being too long.
Recommended
Response Action Retry the operation. If the issue persists, contact your service provider.
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8538
Message Unable to delete key for slot arg1 of service account, due to problem saving key file.
Arguments
• arg1 = slot number
Detailed
Description The Public Key (PK) SSH Authentication key file delete operation did not complete successfully
because the Chassis Management Controller is unable to access the configuration database.
Recommended
Response Action Retry the operation. If the issue persists, contact your service provider.
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
755