Dell PowerEdge VRTX - Manual (Page 327)

LC058
Message Invalid AttributeValue parameter value for corresponding AttributeName value, arg1 .
Arguments
• arg1 = AttributeName
Detailed
Description The attribute value specified in the AttributeValue array is not valid for the corresponding
specified attribute.
Recommended
Response Action Retry the operation with a valid attribute value for the corresponding specified attribute.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC059
Message Cannot set read only attribute specified in AttributeName arg1 .
Arguments
• arg1 = parameter
Detailed
Description The attribute specified is read only and the value cannot be changed.
Recommended
Response Action No response action is required.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
327