Dell PowerEdge VRTX - Manual (Page 798)

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8523
Message The firmware update operation of the iDRAC on the server in slot arg1 is successfully
completed.
Arguments
• arg1 = slot number
Detailed
Description The firmware update operation of the iDRAC identified in the mesaage is successful.
Recommended
Response Action No response action is required.
Category Updates
SubCategory SWU = Software Change
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8524
Message Unable to update the iDRAC on the server in slot arg1 firmware: ErrorCode=0x arg2 .
Arguments
• arg1 = slot number
• arg2 = error no
Detailed
Description The firmware update operation is not successful. This may be due to a problem encountered by
the firmware, or because a server was removed during the firmware update operation.
Recommended
Response Action Reacquire the Image file from the source folder, and then retry the operation.
Category Updates
798