Dell PowerEdge VRTX - Manual (Page 287)

HWC2013
Message Fabric mismatch corrected on fabric arg1 with server in slot arg2 .
Arguments
• arg1 = name
• arg2 = number
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID 2331
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC2014
Message A hardware misconfiguration detected on arg1 .
Arguments
• arg1 = name
Detailed
Description None.
Recommended
Response Action Make sure the hardware is installed correctly. Refer to the product documentation for correct
configuration and installation procedures.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID 2329
LCD Message A hardware misconfiguration detected on <name>. Check hardware
Initial Default. LC Log
287