Dell PowerEdge VRTX - Manual (Page 930)

Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VLT0234
Message The mezzanine card arg1arg2 voltage is outside of range.
Arguments
• arg1 = number
• arg2 = name
Detailed
Description System hardware detected an over voltage or under voltage condition. If multiple voltage
exceptions occur consecutively the system may power down in failsafe mode.
Recommended
Response Action 1) Review system logs for power supply exceptions. 2) Reseat the mezzanine card. 3) If the
problem persists, contact technical support. Refer to the product documentation to choose a
convenient contact method.
Category System Health
SubCategory VLT = Voltage
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VLT0235
Message The mezzanine card arg1arg2 voltage is within range.
Arguments
• arg1 = number
• arg2 = name
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory VLT = Voltage
930