Dell PowerEdge VRTX - Manual (Page 633)

Recommended
Response Action No response action is required. Wait until the firmware update is complete and retry the
operation.
Category Audit
SubCategory RDU = Redundancy
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
RDU8518
Message CMC arg1 : active CMC arg2 requests Standby CMC to go active state.
Arguments
• arg1 = slot number
• arg2 = slot number
Detailed
Description The active CMC requests the Standby CMC to go active. If the user did not initiate this request,
review the chassis log for the reason.
Recommended
Response Action No response action is required.
Category Audit
SubCategory RDU = Redundancy
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
RDU8519
Message Unable to communcate with peer CMC arg1 .
Arguments
• arg1 = slot number
633