Dell PowerEdge VRTX - Manual (Page 367)

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM0004
Message Memory device at location arg1 is disabled.
Arguments
• arg1 = location
Detailed
Description The memory may not be seated correctly, misconfigured, or has failed. Memory size is
reduced.
Recommended
Response Action Re-install the memory component. Review product documentation for supported memory
configurations. If the problem continues, contact support.
Category System Health
SubCategory MEM = Memory
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM0020
Message Memory device at location arg1 is enabled.
Arguments
• arg1 = location
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory MEM = Memory
367