Dell PowerEdge VRTX - Manual (Page 556)

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8516
Message Unable to perform the chassis power action requested..
Detailed
Description Unable to perform the chassis power action requested.
Recommended
Response Action Check the tracelog for more information. If the issue persists, contact your service provider.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8517
Message Unable to turn off chassis power.
Detailed
Description Chassis power state transition did not complete successfully. This may be due to one of the
following: 1) Unable to turn off one or more servers, 2) A firmware update may be in progress.
Recommended
Response Action Check the tracelog for more information. If the issue persists, contact your service provider.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
556