Dell PowerEdge VRTX - Manual (Page 241)

14
FCD Event Messages
FCD8500
Message Unable to apply the arg1 configuration. The affected servers (slot arg2 ) are not turned off.
Arguments
• arg1 = configuration name
• arg2 = slot number
Detailed
Description The server specified in the message must be turned off or the server slot must be empty before
changing the FlexAddress configuration.
Recommended
Response Action Turn off the server and retry the operation.
Category Audit
SubCategory FCD = Feature Card
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
FCD8501
Message The feature is deactivated: arg1 .
Arguments
• arg1 = feature name
Detailed
Description The FlexAddress, FlexAddress+ or extended storage feature is deactivated. Turn chassis off
and remove the feature card.
Recommended
Response Action Turn chassis off and remove the feature card.
Category Audit
SubCategory FCD = Feature Card
241