Dell PowerEdge VRTX - Manual (Page 456)

Detailed
Description The bad block table is the table used for remapping bad disk blocks. This table fills as bad disk
blocks are remapped. When the table is full, bad disk blocks are no longer remapped, which
means that disk errors are no longer corrected. At this point, data loss can occur. The bad
block table is now 80 percent full.
Recommended
Response Action Replace the disk generating this message.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR57
Message Bad block table on arg1 is full. Unable to log block arg2 .
Arguments
• arg1 = physical disk
• arg2 = logical block address
Detailed
Description The bad block table is the table used for remapping bad disk blocks. This table fills as bad disk
blocks are remapped. When the table is full, bad disk blocks are no longer remapped, which
means that disk errors are no longer corrected. At this point, data loss can occur.
Recommended
Response Action Replace the disk generating this message and restore from a backup copy. You may have lost
data.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
456