Dell PowerEdge VRTX - Manual (Page 500)

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PST0134
Message Interrupt controller failed.
Detailed
Description System BIOS detected a failure with the interrupt controller during system POST. This
exception occurred early in system power on, thus the system may not display video. (BIOS
POST Exception code 86)
Recommended
Response Action Remove and reapply input power. If the problem persists, contact technical support. Refer to
the product documentation to choose a convenient contact method.
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Interrupt controller failed. Power cycle system
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PST0135
Message Timer refresh failed.
Detailed
Description System BIOS detected a timer refresh failure during system POST. This exception occurred
early in system power on, thus the system may not display video. (BIOS POST Exception code
87).
Recommended
Response Action Remove and reapply input power. If the problem persists, contact technical support. Refer to
the product documentation to choose a convenient contact method.
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Timer refresh failed. Power cycle system
Initial Default. FALSE
500