Cmc8538, Cmc8539 – Dell PowerEdge VRTX User Manual
Page 122
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
CMC8538
Message
Firmware version string is too long.
Detailed
Description
The length of the CMC firmware version to be sent in the message from local CMC to peer CMC
is too long. Under these conditions, CMC version in the message is displayed as 1.0.
Recommended
Response Action
No response action is required.
Category
Audit
SubCategory
CMC = Chassis Management Controller
Severity
Severity 3 (Informational)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
CMC8539
Message
The CMC
arg1
is unable to log
arg2
event to the Hardware Log.
Arguments
•
arg1 =
slot id
•
arg2 =
event message
Detailed
Description
CMC cannot log new events to Hardware Log if Hardware Log is full. Therefore, new events
are not written to the log unless older events are cleared. This issue also occurs if event
logging is disabled.
Recommended
Response Action
Do the following: 1) Save the Hardware Log if required. 2) Clear the Hardware Log.
Category
Audit
SubCategory
CMC = Chassis Management Controller
Severity
Severity 3 (Informational)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
122