Enc event messages, Enc40, Enc1 – Dell PowerEdge VRTX User Manual
Page 211: 12 enc event messages
12
ENC Event Messages
ENC40
Message
A new enclosure was detected on
arg1
.
Arguments
•
arg1 =
controller name
Detailed
Description
The controller detected a new enclosure. This is due either to a hot plug of an enclosure, or a
power state change of an enclosure. In addition, this message is generated if the daisy chain
order of the enclosures changes.
Recommended
Response Action
No response action is required.
Category
Storage
SubCategory
ENC = Storage Enclosr
Severity
Severity 3 (Informational)
Trap/EventID
4339
LCD Message
No LCD message display defined.
Initial Default.
SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
ENC1
Message
arg1
was inserted.
Arguments
•
arg1 =
Enclosure Management Module Name
Detailed
Description
An Enclosure Management Module (EMM) has failed is inserted into the enclosure.
Recommended
Response Action
No response action is required.
Category
Storage
SubCategory
ENC = Storage Enclosr
211