Pst event messages, Pst0128, Pst0129 – Dell PowerEdge VRTX User Manual

Page 497: 26 pst event messages

Advertising
background image

26

PST Event Messages

PST0128

Message

No memory is detected.

Detailed
Description

System BIOS was unable to detect memory in the system . This exception occurred early in
system power on, thus the system may not display video (BIOS Post Exception 80).

Recommended
Response Action

Inspect System Memory.

Category

System Health

SubCategory

PST = BIOS POST

Severity

Severity 1 (Critical)

Trap/EventID

FALSE

LCD Message

No memory is detected. Inspect memory devices

Initial Default.

FALSE

Filter

Visibility

IPMI Alert SNMP

Alert

Email

Alert

LC Log

LCD

Power Off Power

Cycle

Reset

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

FALSE

PST0129

Message

Memory is detected, but is not configurable.

Detailed
Description

System BIOS detected memory, but was unable to configure the memory for system operation.
Compare system memory installation to supported system memory configurations. Reduce the
system to minimum memory configuration if acceptable. This exception occurred early in
system power on, thus the system may not display video.(BIOS POST Exception Code 81).

Recommended
Response Action

Compare system memory installation to supported system memory configurations.

Category

System Health

SubCategory

PST = BIOS POST

Severity

Severity 1 (Critical)

Trap/EventID

FALSE

LCD Message

Memory is detected, but is not configurable. Check memory devices

Initial Default.

FALSE

497

Advertising