Dell PowerEdge VRTX - Manual (Page 795)

SWU8517
Message Unable to update the iDRAC firmware on the server in slot arg1 . The Image file is not
accessible. ErrorCode=0x arg2 .
Arguments
• arg1 = slot number
• arg2 = error no
Detailed
Description Unable to update the iDRAC firmware. The firmware Image file is not accessible.
Recommended
Response Action Make sure the iDRAC firmware Image file is available in the given path and retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8518
Message The firmware update operation on the iDRAC on the server in slot arg1 is stopped.
Arguments
• arg1 = slot number
Detailed
Description The server was pulled out from the chassis during the iDRAC firmware update operation.
Recommended
Response Action Reinsert the server and retry the operation. If the issue persists, contact your service provider.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
795