Dell PowerEdge VRTX - Manual (Page 252)

HWC2000
Message The arg1 cable or interconnect is connected.
Arguments
• arg1 = name
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID 2331
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC2001
Message The arg1 cable or interconnect is not connected or is improperly connected.
Arguments
• arg1 = name
Detailed
Description The cable may be necessary for proper operation. System functionality may be degraded.
Recommended
Response Action Check presence, then re-install or reconnect.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID 2329
LCD Message The <name> cable or interconnect failure. Check connection
Initial Default. LC Log
252