Dell PowerEdge VRTX - Manual (Page 319)

SubCategory JCP = Job Control
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
JCP008
Message Job completed with errors.
Detailed
Description Multiple attributes were set in the operation but some set attribute actions were not
successful. For example, setting an attribute that is not valid for the component being
configured,
Recommended
Response Action Examine the results of the configuration job in the Lifecycle Log for the source of the errors.
Modify the settings as necessary and resubmit the job.
Category Configuration
SubCategory JCP = Job Control
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
JCP011
Message Invalid parameter value for arg1
Arguments
• arg1 = parameter
Detailed
Description The value provided for the specified parameter is invalid and must be corrected for the invoked
method to complete successfully.
Recommended
Response Action To provide the correct value for the specified parameter, see Lifecycle Controller-Remote
Services documentation. Retry the operation requested with corrected value.
Category Configuration
319