Dell PowerEdge VRTX - Manual (Page 187)

Detailed
Description The text for this message is generated by the controller during runtime and can vary depending
on the situation.
Recommended
Response Action Make sure the SAS cables attached to the enclosure/backplane are attached securely. Refer
to the storage hardware documentation for more information on checking the cables. Contact
technical support if the issue persists.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 2 (Warning)
Trap/EventID 4330
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL52
Message arg1 SAS port report: arg2
Arguments
• arg1 = Controller name
• arg2 = args
Detailed
Description This alert is provided for informational purposes. The text for this alert is generated by the
controller and can vary depending on the situation.
Recommended
Response Action No response action is required.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 3 (Informational)
Trap/EventID 4331
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL53
Message A controller hot plug has been detected.
187