Dell PowerEdge VRTX - Manual (Page 289)

LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC5037
Message I/O module arg1 failed to boot.
Arguments
• arg1 = number
Detailed
Description The firmware on the I/O module did not boot. The problem may be because the I/O module is
not inserted correctly.
Recommended
Response Action Reseat I/O module. If problem persists, contact the service provider.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID 2329
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC1201
Message The arg1 was removed from slot arg2 .
Arguments
• arg1 = name
• arg2 = number
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
289