Dell PowerEdge VRTX - Manual (Page 224)

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
ENC25
Message arg1 has a hardware error.
Arguments
• arg1 = enclosure name
Detailed
Description The enclosure or an enclosure component is in a Failed or Degraded state.
Recommended
Response Action Verify the health of the enclosure and its components. See the storage hardware
documentation for more information. Contact technical support.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
ENC26
Message arg1 is not responding.
Arguments
• arg1 = enclosure name
Detailed
Description The enclosure or an enclosure component is in a Failed or Degraded state. It is not responding
to storage management commands or there is a connectivity problem between the controller
and enclosure.
Recommended
Response Action Verify the health of the enclosure and its components. See the hardware documentation to for
more information. Contact technical support.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 1 (Critical)
Trap/EventID 4337
LCD Message No LCD message display defined.
224