Dell PowerEdge VRTX - Manual (Page 619)

30
RAC Event Messages
RAC038
Message Unable to perform the operation due to an unknown error in iDRAC.
Detailed
Description The operation failed to run due to an unknown error in iDRAC.
Recommended
Response Action Retry the action. If this fails, reset iDRAC.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC039
Message Invalid parameter value for arg1 .
Arguments
• arg1 = parameter
Detailed
Description The value provided for the specified parameter is invalid.
Recommended
Response Action Verify the value for the specified parameter. Refer to the Lifecycle Controller-Remote Services
documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
619