Dell PowerEdge VRTX - Manual (Page 273)

LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC5032
Message A fabric mismatch detected on IO module arg1 .
Arguments
• arg1 = number
Detailed
Description The fabric type for IOMs on the same chassis fabric must match.
Recommended
Response Action Check chassis fabric type in CMC GUI and compare to the type of both IOMs.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
Trap/EventID 2330
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC5033
Message IO module arg1 is operating correctly.
Arguments
• arg1 = number
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
273