Dell PowerEdge VRTX - Manual (Page 718)

Recommended
Response Action Update the Chassis Infrastructure firmware.
Category Storage
SubCategory STOR = Storage
Severity Severity 1 (Critical)
Trap/EventID 4177
LCD Message No LCD message display defined.
Initial Default. LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
STOR11
Message The currently detected hardware configuration is High Availability Ready. However, the current
software solution does not yet support high availability.
Detailed
Description The current hardware configuration is setup correctly for High Availability. However, the
current firmware does not provide this functionality. Therefore one of the cards will be kept in
a powered down state until High Availability firmware is installed.
Recommended
Response Action None Required.
Category Storage
SubCategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID 4179
LCD Message No LCD message display defined.
Initial Default. LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
STOR003
Message Missing parameter.
Detailed
Description Required parameter is missing
Recommended
Response Action Refer to the RAID profile to determine required parameters
718