Dell PowerEdge VRTX - Manual (Page 428)

Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR3
Message arg1 is not functioning correctly.
Arguments
• arg1 = PD Name
Detailed
Description The RAID Controller may not be able to read/write data to the physical disk drive indicated in
the message. This may be due to a failure with the physical disk drive or because the physical
disk drive was removed from the system.
Recommended
Response Action Remove and re-insert the physical disk drive identified in the message and make sure the
physical disk drive is inserted properly. If the issue persists, replace the physical disk drive.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR4
Message arg1 returned to a ready state.
Arguments
• arg1 = physical disk
Detailed
Description A physical drive that was previously in an error state has returned to a ready state.
Recommended
Response Action No response action is required.
Category Storage
428