Pdr94, Pdr95 – Dell PowerEdge VRTX User Manual
Page 473
Trap/EventID
4347
LCD Message
No LCD message display defined.
Initial Default.
SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
PDR94
Message
Microcode update on
arg1
has timed out.
Arguments
•
arg1 =
physical disk
Detailed
Description
The attempt to update the physical disk has timed out. This may be due to too much activity on
the bus, a bad update package, or a bad disk.
Recommended
Response Action
Retry the update. The update utility may have already performed the retry operation.
Category
Storage
SubCategory
PDR = Physical Disk
Severity
Severity 3 (Informational)
Trap/EventID
4347
LCD Message
No LCD message display defined.
Initial Default.
SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
PDR95
Message
Microcode update on
arg1
has failed.
Arguments
•
arg1 =
physical disk
Detailed
Description
The attempt to update the physical disk has failed. This is due to too much activity on the bus, a
bad update package, or a bad disk.
Recommended
Response Action
Retry the update. If the update fails a second time, verify the update package is valid. If the
update package is valid, replace the failing disk. Contact technical support if the problem
persists.
Category
Storage
473