Dell PowerEdge VRTX - Manual (Page 471)

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR86
Message Bad block table on arg1 is full.
Arguments
• arg1 = physical disk
Detailed
Description The number of blocks on the disk that exhibit an error has exceeded the capacity of the drive to
remap. Any future writes to bad sectors will be unrecoverable.
Recommended
Response Action Replace the disk.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR87
Message arg1 was reset.
Arguments
• arg1 = physical device
Detailed
Description The physical device was reset. This is a normal part of operations and is not a cause for
concern.
Recommended
Response Action No response action is required.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 3 (Informational)
Trap/EventID 4347
LCD Message No LCD message display defined.
471