Rdu8523, Rdu8524 – Dell PowerEdge VRTX User Manual
Page 636
RDU8523
Message
CMC
arg1
: reset by peer CMC
Arguments
•
arg1 =
slot number
Detailed
Description
The CMCidentified in the message was reset by other CMC. This occurs during failover and
CMC firmware update to the standby CMC.
Recommended
Response Action
No response action is required.
Category
Audit
SubCategory
RDU = Redundancy
Severity
Severity 3 (Informational)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
RDU8524
Message
CMC
arg1
: failover is not allowed
Arguments
•
arg1 =
slot number
Detailed
Description
CMC failover action is not allowed in the current configuration.
Recommended
Response Action
No response action is required.
Category
Audit
SubCategory
RDU = Redundancy
Severity
Severity 3 (Informational)
Trap/EventID
FALSE
LCD Message
No LCD message display defined.
Initial Default.
LC Log
636