Dell PowerEdge VRTX - Manual (Page 802)

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8531
Message Unable to update the iKVM firmware. The firmware update timeout limit is exceeded.
Detailed
Description The firmware update operation is not successful, because the Update process was not
completed within the firmware update timeout duration.
Recommended
Response Action Retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8532
Message Unable to update the LKVM firmware, because an invalid parameter is entered.
ErrorCode=0x
arg1 .
Arguments
• arg1 = error no
Detailed
Description The LKVM firmware update operation is not successful, because an invalid parameter is
entered.
Recommended
Response Action Retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
802