PLANET WGSW-50040 - Manual (Page 114)

5.5 show port-group
Command:
show port-group [<port-group-number>] {brief | detail | load-balance | port | port-channel}
Parameters:
<port-group-number> is the group number of port channel to be displayed, from 1 to 32;
brief displays summary information;
detail displays detailed information;
load-balance displays load balance information;
port displays member port information;
port-channel displays port aggregation information.
Command mode:
Admin and Configuration Mode.
Usage Guide:
If port-group-number is not specified, then information for all port groups will be displayed.
Example:
1. Display the summary information of port-group 1.
Switch#sho port-group brief
ID: port group number; Mode: port group mode such as on active or passive;
Ports: different types of port number of a port group,
the first is selected ports number, the second is standby ports number, and
the third is unselected ports number.
ID Mode Partner ID Ports Load-balance
---------------------------------------------------------------
1 active 0x8000,0012-cf4d-e1a1 8,1,1 dst-src-mac
10 passive 0x8000,0012-cf4d-e1b2 8,2,0 dst-src-ip
20 on 8,0,0 src-ip
2. Display the detailed information of port-group 1.
Switch#show port-group 1 detail
Flags: A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Port-group number: 1, Mode: active, Load-balance: dst-src-mac
Port-group detail information:
System ID: 0x8000,0003-0f0c-166d