PLANET WGSW-50040 - Manual (Page 383)

Command Mode:
Admin Mode.
Usage Guide:
By enabling the debug information of AAA about events, users can check the information of all kinds
of event generated in the operation process of Radius protocol, which might help diagnose the
cause of faults if there is any.
Example:
Enable the debug information of AAA about events.
Switch#debug aaa detail event
27.8 debug aaa error
Command:
debug aaa error
no debug error
Function:
Enable the debug information of AAA about errors; the no operation of this command will disable
that debug information.
Command Mode:
Admin Mode.
Usage Guide:
By enabling the debug information of AAA about errors, users can check the information of all kinds
of errors that occurs in the operation process of Radius protocol, which might help diagnose the
cause of faults if there is any.
Example:
Enable the debug information of AAA about errors.
Switch#debug aaa error
27.9 radius nas-ipv4
Command:
radius nas-ipv4 <ip-address>
no radius nas-ipv4