PLANET WGSW-50040 - Manual (Page 181)

Example:
Creating and then deleting a class map named “c1”.
Switch(config)#class-map c1
Switch(Config-ClassMap-c1)#exit
Switch(config)#no class-map c1
10.4 class mls qos statistics
Command:
clear mls qos statistics [interface <interface-name> | vlan <vlan-id>]
Function:
Clear accounting data of the specified ports or VLAN Policy Map. If there are no parameters, clear
accounting data of all policy map.
Parameters:
<vlan-id>: VLAN ID.
<interface-name>: The interface name.
Default:
Do not set action.
Command mode:
Admin Mode
Usage Guide:
Clear accounting data of the specified ports or VLAN Policy Map. If there are no parameters, clear
accounting data of all policy map.
Example:
Clear the Policy Map statistic of VLAN 100.
Switch#Clear mls qos statistics vlan 100
10.5 match
Command:
match {access-group <acl-index-or-name> | ip dscp <dscp-list> | ip precedence
<ip-precedence-list> | ipv6 access-group <acl-index-or-name> | ipv6 dscp <dscp-list> | ipv6
flowlabel <flowlabel-list> | vlan <vlan-list> | cos <cos-list>}
no match {access-group | ip dscp | ip precedence| ipv6 access-group| ipv6 dscp | ipv6