1 cpu-rx-ratelimit total, 2 cpu-rx-ratelimit queue-length, Packets received and sent by cpu – PLANET WGSW-50040 User Manual
Page 433: Ratelimit total, Ratelimit queue, Length
Chapter 34 Commands for
Debugging and Diagnosis
for Packets Received and
Sent by CPU
34.1 cpu-rx-ratelimit total
Command:
cpu-rx-ratelimit total <packets>
no cpu-rx-ratelimit total
Function:
Set the total rate of the CPU receiving packets, the no command sets the total rate of the CPU
receiving packets to default.
Parameter:
<packets> is the max number of CPU receiving packets per second.
Command Mode:
Global Mode
Default:
1200pps.
Usage Guide:
The total rate set by the command have an effect on CPU receiving packets, so it is supposed to be
used with the help of the technical support.
Example:
Set the total rate of the CPU receive packets to 1500pps.
Switch(config)#cpu-rx-ratelimit total 1500
34.2 cpu-rx-ratelimit queue-length
Command:
cpu-rx-ratelimit queue-length <queue-id> <qlen-value>
no cpu-rx-ratelimit queue-length <queue-id>
Function: