PLANET WGSW-50040 - Manual (Page 26)

<minute> is the time value shown in minute and ranges between 0~35791.<seconds> is the time
value shown in seconds and ranges between 0~2147483.
Command mode:
Global mode
Default:
Default timeout is 10 minutes.
Usage guide:
To secure the switch, as well to prevent malicious actions from unauthorized user, the time will be
count from the last configuration the admin had made, and the system will exit the admin mode at
due time. It is required to enter admin code and password to enter the admin mode again. The
timeout timer will be disabled when the timeout is set to 0.
Example:
Set the admin mode timeout value to 6 minutes
Switch(config)#exec-timeout 6
Set the admin mode timeout value to 5 minutes, 30 seconds
Switch(config)#exec-timeout 5 30
1.1.8 end
Command:
end
Function:
Quit current mode and return to Admin mode when not at User Mode/ Admin Mode.
Command mode:
Except User Mode/ Admin Mode
Example:
Quit VLAN mode and return to Admin mode.
Switch(config-vlan1)#end
Switch#
1.1.9 exit
Command:
exit
Function: