PLANET WGSW-50040 - Manual (Page 80)

using nodes-sn mode.
Default:
None.
Command Mode:
Global Mode
Usage Guide:
After executing this command, the switch will add those identified in <nodes-sn> or
<mac-address>into the cluster it belongs to. One or more candidates are allowed at one time,
linked with ‘-‘ or ‘;’. A switch can only be member or commander of one cluster, exclusively. Attempts
to execute the command on a non commander switch will return error. The no operation of this
command will delete the specified member switch, and turn it back to a candidate.
Example:
In the commander switch, add the candidate switch which has the sequence number as 1. In the
commander switch, add the switch whose the mac address is 11-22-33-44-55-66 to member, and
the member-id is 5.
Switch(config)#cluster member nodes-sn 1
Switch(config)#cluster member mac-address 11-22-33-44-55-66 id 5
2.8 cluster member auto-to-user
Command:
cluster member auto-to-user
Function:
All members will be deleted when configuring no cluster auto-add. Users need to change
automatically added members to manually added ones to keep them.
Parameter:
None.
Default:
None.
Command Mode:
Global Mode.
Usage Guide:
Execute this command on a switch to change automatically added members to manually added
ones.
Example:
change automatically added members to manually added ones.