PLANET WGSW-50040 - Manual (Page 221)

Displayed information Explanation
Vlan1 Layer 3 interface name
[up/up] Layer 3 interface status
dev index Internal index No.
fe80::203:fff:fe00:10 Automatically configured IPv6 address of Layer 3
interface
3001::1 Configured IPv6 address of Layer 3 interface
12.2.17 show ipv6 route
Command:
show ipv6 route [database]
Function:
Display IPv6 routing table.
Parameter:
database is router database.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
show ipv6 route only shows IPv6 kernal routing table (routing table in tcpip), database shows all
routers except the local router.
Example:
Switch#show ipv6 route
Codes: C - connected, L - Local, S - static, R - RIP, O - OSPF,
I - IS-IS, B - BGP
C ::/0 via ::, tunnel3 256
S 2001:2::/32 via fe80::789, Vlan2 1024
S 2001:2:3:4::/64 via fe80::123, Vlan2 1024
O 2002:ca60:c801:1::/64 via ::, Vlan1 1024
C 2002:ca60:c802:1::/64 via ::, tunnel49 256
C 2003:1::/64 via ::, Vlan4 256
C 2003:1::5efe:0:0/96 via ::, tunnel26 256
S 2004:1:2:3::/64 via fe80:1::88, Vlan2 1024
O 2006:1::/64 via ::, Vlan1 1024
S 2008:1:2:3::/64 via fe80::250:baff:fef2:a4f4, Vlan1 1024
C 2008:2005:5:8::/64 via ::, Ethernet0 256
S 2009:1::/64 via fe80::250:baff:fef2:a4f4, Vlan1 1024