Chapter 27 commands for radius, 1 aaa enable, 2 aaa-accounting enable – PLANET WGSW-50040 User Manual
Page 379: Aaa enable, Accounting enable
Chapter 27 Commands for
RADIUS
27.1 aaa enable
Command:
aaa enable
no aaa enable
Function:
Enables the AAA authentication function in the switch; the "no AAA enable" command disables the
AAA authentication function.
Command mode:
Global Mode.
Default:
AAA authentication is not enabled by default.
Usage Guide:
The AAA authentication for the switch must be enabled first to enable IEEE 802.1x authentication
for the switch.
Example:
Enabling AAA function for the switch.
Switch(config)#aaa enable
27.2 aaa-accounting enable
Command:
aaa-accounting enable
no aaa-accounting enable
Function:
Enables the AAA accounting function in the switch: the "no aaa-accounting enable" command
disables the AAA accounting function.
Command mode:
Global Mode
Default: