PLANET WGSW-50040 - Manual (Page 194)

Parameters:
input <policy-map-name> applies the specified policy map to the ingress direction of switch VLAN
interface.
Default:
No policy map is bound to VLAN interface by default.
Command mode:
Global Configuration Mode.
Usage Guide:
Only one policy map can be applied to each direction of each port or VLAN interface. It is not
recommended to use policy map on VLAN and VLAN’s port at the same time. Egress policy map is
not supported yet.
Example:
Bind policy p1 to ingress of VLAN interface v2, v3, v4, v6.
Switch(config)# service-policy input p1 vlan 2-4;6
10.19 show class-map
Command:
show class-map [<class-map-name>]
Function:
Displays class map of QoS.
Parameters:
< class-map-name> is the class map name.
Command mode:
Admin Mode.
Usage Guide:
Displays all configured class-map or specified class-map information.
Example: