PLANET WGSW-50040 - Manual (Page 176)

DsgPort Upward designated port of the current port in the current
instance
9.2.2 show spanning-tree mst config
Command:
show spanning-tree mst config
Function:
Display the configuration of the MSTP in the Admin mode.
Command mode:
Admin Mode
Usage Guide:
In the Admin mode, this command can show the parameters of the MSTP configuration such as
MSTP name, revision, VLAN and instance mapping.
Example:
Display the configuration of the MSTP on the switch.
Switch#show spanning-tree mst config
Name switch
Revision 0
Instance Vlans Mapped
----------------------------------
00 1-29, 31-39, 41-4094
03 30
04 40
----------------------------------
9.2.3 show mst-pending
Command:
show mst-pending
Function:
In the MSTP region mode, display the configuration of the current MSTP region.
Command mode:
Admin Mode
Usage Guide: