PLANET WGSW-50040 - Manual (Page 143)

7.3 Commands for Voice VLAN Configuration
7.3.1 show voice-vlan
Command:
show voice-vlan
Function:
Display the configuration status of the Voice VLAN on the switch.
Command Mode:
Admin Mode and other Configuration Mode.
Usage Guide:
Display Voice VLAN Configuration.
Example:
Display the Current Voice VLAN Configuration.
Switch#show voice-vlan
Voice VLAN ID:2
Ports:ethernet1/1;ethernet1/3
Voice name MAC-Address Mask Priority
------------ ----- ---------------------- ----- --------
financePhone 00-e0-4c-77-ab-9d 0xff 5
manager 00-0a-eb-26-8d-f3 0xfe 6
Mr_Lee 00-30-4f-11-22-33 0x80 5
NULL 00-30-4f-11-22-33 0x0 5
7.3.2 switchport voice-vlan enable
Command:
switchport voice-vlan enable
no switchport voice-vlan enable
Function:
Enable the Voice VLAN function on the port; the “no” form of this command disables Voice VLAN
function on the port.
Command Mode:
Port Mode.
Default:
Voice VLAN is enabled by default.
Usage Guide: