PLANET WGSW-50040 - Manual (Page 306)

Commands for Security Function Chapter 6 Commands for TACACS+
Configure the maximum query response period. The “no” form of this command restores the default
value.
Parameter:
vlan-id: VLAN ID, the valid range is<1-4094>
value: the valid range is <1-25> secs .
Command Mode:
Global Mode
Default:
10s
Usage Guide:
It is recommended to use default value and if layer 3 MLD is in operation, please make this
configuration in accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query-mrsp 18
19.1.13 ipv6 mld snooping vlan query-robustness
Command:
ipv6 mld snooping vlan <vlan-id> query-robustness <value>
no ipv6 mld snooping vlan <vlan-id> query-robustness
Function:
Configure the query robustness; the “no” form of this command restores to the default value.
Parameter:
vlan-id: VLAN ID, the valid range is <1-4094>
value: the valid range is <2-10>.
Command Mode:
Global Mode
Default:
2
Usage Guide:
It is recommended to use default value and if layer 3 MLD is in operation, please make this
configuration in accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query- robustness 3