PLANET WGSW-50040 - Manual (Page 210)

Destination Target network
Mask Target network mask
Nexthop Next-hop IP address
Interface Next-hop pass-by layer 3 swtich interfaces
Preference Route priority. If other types of route to the target network
exists, the kernel route will only shows those with high
priority.
12.2 Commands for IPv6 configuration
12.2.1 clear ipv6 neighbor
Command:
clear ipv6 neighbors
Function:
Clear the neighbor cache of IPv6.
Parameter:
None
Command Mode:
Admin Mode
Default:
None
Usage Guide:
This command can not clear static neighbor.
Example:
Clear neighbor list.
Switch#clear ipv6 neighbors
12.2.2 debug ipv6 packet
Command:
debug ipv6 packet
no debug ipv6 packet
Function:
IPv6 data packets receive/send debug message.