PLANET WGSW-50040 - Manual (Page 432)

Command Mode:
Admin mode.
Usage Guide:
With this command, users can cancel the specified time period to reload the switch, that is, to
cancel the configuration of command ”reload after”. This command will not be reserved.
Example:
Prevent the switch to automatically reboot after the specified time.
Switch#reload cancel
Reload cancel successful.
Related Commands:
reload, reload after, show reload
33.3 show reload
Command:
show reload
Function:
Display the user’s configuration of command “reload after”.
Command Mode:
Admin and configuration mode
Usage Guide:
With this command, users can view the configuration of command “reload after” and check how
long a time is left before rebooting the switch.
Example:
View the configuration of command “reload after”. In the following case, the user set the switch to be
rebooted in 10 hours and 1 second, and there are still 9 hours 59 minutes and 48 seconds left
before rebooting it.
Switch#show reload
The original reload after configuration is 10:00:01.
System will be rebooted after 09:59:48 from now.
Related Commands:
reload, reload after, reload cancel