PLANET WGSW-50040 - Manual (Page 369)

Commands for Security Function Chapter 6 Commands for TACACS+
Function:
Display the configured AM entries.
Parameters:
<interface-name> is the name of the interface of which the configuration information will be
displayed. No parameter means to display the AM configuration information of all interfaces.
Command Mode:
Admin and Configuration Mode.
Example:
Display all configured AM entries.
Switch#show am
AM is enabled
Interface Ethernet1/3
am interface
am ip-pool 30.10.10.1 20
Interface Ethernet1/5
am interface
am ip-pool 50.10.10.1 30
am mac-ip-pool 00-02-04-06-08-09 20.10.10.5
am ip-pool 50.20.10.1 20
Interface Ethernet1/6
am interface
Interface Ethernet1/1
am interface
am ip-pool 10.10.10.1 20
am ip-pool 10.20.10.1 20
Display the AM configuration entries of ehternet1/5 of the switch.
Switch#show am interface ethernet 1/5
AM is enabled
Interface Etherne1/5
am interface
am ip-pool 50.10.10.1 30
am mac-ip-pool 00-02-04-06-08-09 20.10.10.5
am ip-pool 50.20.10.1 20