PLANET WGSW-50040 User Manual
Page 298
Commands for Security Function Chapter 6 Commands for TACACS+
2. Display the IGMP Snooping summary messages of vlan1.
Switch#show ip igmp snooping vlan 1
Igmp snooping information for vlan 1
Igmp snooping L2 general querier :Yes(COULD_QUERY)
Igmp snooping query-interval :125(s)
Igmp snooping max reponse time :10(s)
Igmp snooping robustness :2
Igmp snooping mrouter port keep-alive time :255(s)
Igmp snooping query-suppression time :255(s)
IGMP Snooping Connect Group Membership
Note:*-All Source, (S)- Include Source, [S]-Exclude Source
Groups Sources Ports Exptime System Level
238.1.1.1 (192.168.0.1) Ethernet1/8 00:04:14 V2
(192.168.0.2) Ethernet1/8 00:04:14 V2
Igmp snooping vlan 1 mrouter port
Note:"!"-static mrouter port
!Ethernet1/2
Displayed Information
Explanation
Igmp snooping L2 general querier
Whether the VLAN enables l2-general-querier function and show
whether the querier state is could-query or suppressed
Igmp snooping query-interval
Query interval of the VLAN
Igmp snooping max reponse time
Max response time of the VLAN
Igmp snooping robustness
IGMP Snooping robustness configured on the VLAN
Igmp snooping mrouter port
keep-alive time
keep-alive time of dynamic mrouter of the VLAN
Igmp snooping query-suppression
time
Suppression timeout of VLAN when as l2-general-querier
IGMP Snooping Connect Group
Membership
Group membership of this VLAN, namely the correspondence
between ports and (S,G)
Igmp snooping vlan 1 mrouter port
mrouter port of the VLAN, including both static and dynamic