Chapter 24 commands for am configuration, 1 am enable, 2 am port – PLANET WGSW-50040 User Manual
Page 366: Am enable, Am port
Advertising
Commands for Security Function Chapter 6 Commands for TACACS+
Chapter 24 Commands for
AM Configuration
24.1 am enable
Command:
am enable
no am enable
Function:
Globally enable/disable AM function.
Default:
AM function is disabled by default.
Command Mode:
Global Mode.
Default:
AM function is disabled on all port.
Example:
Enable AM function on the switch.
Switch(config)#am enable
Disable AM function on the switch.
Switch(config)#no am enable
24.2 am port
Command:
am iport
no am port
Function:
Enable/disable AM function on port.
Default:
AM function is disabled on all port.
Command Mode:
Port Mode.
Example:
Advertising