PLANET WGSW-50040 - Manual (Page 368)

Commands for Security Function Chapter 6 Commands for TACACS+
Parameter:
<mac-address> is the source MAC address;
< ip-address> is the source IP address of the packets, which is a 32 bit binary number represented
in four decimal numbers.
Default:
MAC-IP address pool is empty.
Command Mode:
Port Mode.
Example:
Configure that the interface 1/3 of the switch will allow data packets with a source MAC address of
11-22-22-11-11-11 and a source IP address of 10.10.10.1 to be forwarded.
Switch(Config-If-Ethernet1/3)#am mac-ip-pool 11-22-22-11-11-11 10.10.10.1
24.5 no am all
Command:
no am all [ip-pool | mac-ip-pool]
Function:
Delete MAC-IP address pool or IP address pool or both pools configured by all users.
Parameters:
ip-pool is the IP address pool;
mac-ip-pool is the MAC-IP address pool; no parameter means both address pools.
Default:
Both address pools are empty at the beginning.
Command Mode:
Global Mode
Example:
Delete all configured IP address pools.
Switch(config)#no am all ip-pool
24.6 show am
Command:
show am [interface <interface-name>]