PLANET WGSW-50040 - Manual (Page 124)

Parameter:
<timer-value> is the value for GARP leaveall timer, the valid range is 100 to 327650 ms.
Command mode:
Global Mode.
Default:
The default value for leaveall timer is 10000 ms.
Usage Guide:
When a GARP application entity starts, the leaveall timer is started at the same time. When the
leaveall timer is over, the GARP application entity will send a leaveall message. Other application
entities will cancel all property information for that application entity, and the leaveall timer is cleared
for a new cycle.
Example:
Set the GARP leaveall timer value to 50000 ms.
Switch(config)#garp timer leaveall 50000
7.1.9 name
Command:
name <vlan-name>
no name
Function:
Specify a name, a descriptive string, for the VLAN; the no operation of the command will delete the
name of the VLAN.
Parameters:
<vlan-name> is the specified name string.
Command Mode:
VLAN Configuration Mode.
Default:
The default VLAN name is vlanXXX, where xxx is VID.
Usage Guide:
The switch can specify names for different VLANs, making it easier for users to identify and manage
VLANs.
Examples:
Specify the name of VLAN100 as TestVlan.
Switch(Config-Vlan100)#name TestVlan