PLANET WGSW-50040 - Manual (Page 392)

Usage Guide:
Usually the administrator concerns only information about the authenticating user, the other
information displays is used for troubleshooting by the technical support.
Example:
Switch#show aaa authenticating-user
------------------------- authenticating users ------------------------------
User-name Retry-time Radius-ID Port Eap-ID Chap-ID Mem-Addr State
-----------------------------------------------------------------------------
--------------- total: 0 ---------------
27.20 show aaa config
Command:
show aaa config
Function:
Displays the configured commands for the switch as a RADIUS client.
Command mode:
Admin and Configuration Mode.
Usage Guide:
Displays whether AAA authentication, accounting are enabled and information for key,
authentication and accounting server specified.
Example:
Switch#show aaa config（For Boolean value, 1 stands for TRUE and 0 for FALSE）
----------------- AAA config data ------------------
Is Aaa Enabled = 1 :1 means AAA authentication is enabled, 0 means is not
enabled
Is Account Enabled= 1 :1 means AAA account is enabled, 0 means is not enabled
MD5 Server Key = yangshifeng : Authentication key
authentication server sum = 2 :Configure the number of authentication server
authentication server[0].sock_addr = 2:100.100.100.60.1812 :The address protocol
group, IP and interface number of the first authentication server