PLANET WGSW-50040 - Manual (Page 416)

information output is explained as follows：only those with a level equal to or higher than the
threshold will be outputted. For detailed description on the severity please refer to the operation
manual.
Command Mode:
Global Mode
Default:
No log information output to the log host by default. The default recorder of the log host is the local0,
the default severity level is warnings.
Usage Guide:
Only when the log host is configured by the logging command, this command will be available. We
can configure many IPv4 and IPv6 log hosts.
Example:
Send the log information with a severity level equal to or higher than warning to the log server with
an IPv4 address of 100.100.100.5, and save to the log recording equipment local1.
Switch(config)# logging 100.100.100.5 facility local1 level warnings
Send the log information with a severity level equal to or higher than informational to the log server
with an IPv6 address of 3ffe:506:1:2::3, and save to the log recording equipment local5.
Switch(config)# logging 3ffe:506:1:2::3 facility local1 level informational
32.3 logging loghost sequence-number
Command:
logging loghost sequence-number
no logging loghost sequence-number
Function:
Add the loghost sequence-number for the log, the no command does not include the loghost
sequence-number.
Command Mode:
Port Mode
Default:
Do not include the sequence-number.
Usage Guide:
Use logging command to configure the loghost before this command is set.
Example: